Answers tagged "clear coat"

30 related answers

Use this for automotive-style clear coat correction and prep.

2000 grit does not make the surface shiny

The surface looks smooth after 2000 grit but still looks dull or hazy.

Use 1500, 2000, then 3000 before polishing. After 3000, use the correct polish for the material.Wet for clear coat, plastic, resin, and similar fine finishing work.

View solution

Can I sand carbon fiber clear coat?

Carbon fiber parts can be damaged if sanding cuts through the clear coat.

Use 1000, 1500, 2000, and 3000 only on the clear coat before polishing.Wet.

View solution

Can I sand carbon fiber?

Carbon fiber sanding can create harmful dust and can damage the weave or clear coat.

For clear coat only, use 1000, 1500, 2000, then 3000 wet before polishing.Wet for clear coat finishing to reduce dust.

View solution

Can wet/dry sandpaper be used without water?

Wet/dry sandpaper can confuse customers because the name includes wet and dry.

Use dry sanding for early shaping and wood prep. Use wet sanding for fine finishing, clear coat, plastic, resin, and polishing prep.Wet or dry.

View solution

Clear coat is hazy after 1000 grit

Clear coat looks dull or hazy after sanding with 1000 grit.

Refine 1000 grit marks with 1200, 1500, 2000, and 3000 before polishing.Use wet sanding with clean water and light pressure when the clear coat is fully cured and safe to wet sand.

View solution

Clear coat looks cloudy after sanding

Clear coat looks cloudy or dull after wet sanding.

Refine with 1500, 2000, then 3000.Wet.

View solution

Deep lines remain on clear coat

Fine sanding leaves some deeper lines in clear coat.

Wet sand through 1000, 1500, 2000, and 3000. Use 800 only to correct deeper lines.Wet.

View solution

Dry sanding clear coat leaves scratches

Clear coat shows visible scratches after dry sanding.

Use clean wet sanding with 1000, 1500, 2000, and 3000 for clear coat refinement.Wet.

View solution

Grit is too coarse between coats

The sanding scratches between coats are too visible.

Use 400 for primer, 600 for paint or finish coats, and 800 or finer near the final coat.Use dry sanding for coatings that are not water-safe. Use wet sanding only after the coat is fully cured and compatible with water.

View solution

How to avoid sanding through clear coat edges

Clear coat can sand through quickly on edges, corners, and body lines.

Use 1500, 2000, or 3000 near edges. Avoid coarse grits on clear coat edges.Wet.

View solution

Is haze normal after wet sanding?

The surface looks hazy or dull after wet sanding.

Use 1500, 2000, and 3000 to refine normal wet-sanding haze.Wet.

View solution

Leveling orange peel in clear coat

Clear coat has orange peel texture that needs to be leveled.

Use 1000 or 1200 for normal orange peel leveling, then refine with 1500, 2000, and 3000.Use wet sanding on fully cured clear coat with clean water, light pressure, and frequent rinsing.

View solution

Swirls from dirty wet sanding water

Wet sanding leaves swirl marks because the water or surface is dirty.

Stay with the current grit until the dirty-water marks are removed, then refine with the next finer grits such as 1500, 2000, and 3000.Use wet sanding with clean water. Rinse the sheet and surface often so residue does not become an abrasive slurry.

View solution

Swirls remain after 1000 grit

Swirl marks are still visible after sanding with 1000 grit.

Use 800 only for deeper swirls, 1000 for normal leveling, then refine with 1200, 1500, 2000, and 3000.Use wet sanding on fully cured clear coat or water-safe surfaces, with clean water and light pressure.

View solution

Using the assorted kit for heavy removal

It is unclear which assorted kit grits to use for heavy removal.

Use 60 or 80 for aggressive removal, 120 for controlled removal, then refine with 150, 180, and 220.Use dry sanding for most heavy removal. Use wet sanding only when the material and work area can handle water.

View solution

Using the assorted kit for polishing prep

It is unclear which assorted kit grits to use before polishing.

Use 1000 to start fine leveling, then refine with 1200, 1500, 2000, and 3000 before polishing.Use wet sanding for polishing prep when the coating or surface can safely be rinsed. Keep the surface and sheet clean.

View solution

Wet sanding haze is uneven

Wet sanding leaves a haze that is uneven across the surface.

Use the current grit until the pattern is even, then refine through 1500, 2000, and 3000 when preparing for polish.Use wet sanding with clean water, light pressure, and frequent rinsing on water-safe surfaces.

View solution

What grit for alloy wheel clear coat scratches?

Alloy wheel clear coat scratches can stay visible after sanding.

Use 1000 or 1500 for light scratches, then 2000 and 3000 before polish.Wet.

View solution

What grit for clear coat blend edge?

A clear coat blend edge can show a ridge or dull transition after repair.

Use 2000, then 3000 before polishing.Wet.

View solution

What grit for clear coat dust nibs?

Small dust nibs or raised specks are visible in clear coat.

Use 1500 or 2000 for nib leveling, then 3000 before polishing.Wet.

View solution

What grit for plywood before clear coat?

Plywood can show sanding scratches or blotchy areas under clear finish.

Use 180, then 220 before clear coat. Use 320 only for light scuffing between cured coats.Dry.

View solution

What grit for refinishing stair treads?

Stair treads can show worn finish, scratches, and uneven bare wood during refinishing.

Use 80 or 100 for worn finish removal, then 120, 180, and 220 for prep.Dry.

View solution

What grit removes clear coat overspray?

Clear coat overspray can leave a rough texture on the surface.

Use 1500 or 2000 wet sanding for light overspray, then 3000 before polishing.Wet.

View solution

What grit removes clear coat runs on plastic?

Clear coat runs on plastic can leave raised ridges before polishing.

Use 1000 or 1500 to level cured runs, then 2000 and 3000 before polish.Wet.

View solution

What grit removes dust nibs in clear coat?

Small dust bumps can remain trapped in clear coat after drying.

Use 1500 or 2000 for small nibs, then 3000 before polishing.Wet.

View solution

What grit should I use for automotive wet sanding?

The user needs a safe fine-grit path for automotive wet sanding.

Use 1000, 1500, 2000, then 3000 for fine wet sanding stages.Wet.

View solution

What grit should I use for orange peel?

The user wants to reduce orange peel texture in a suitable finish.

Use the finest grit that levels the texture, commonly 1000 or 1500, then refine with 2000 and 3000.Wet.

View solution

What grit to level car touch-up paint?

Touch-up paint can dry as a raised blob above the surrounding paint.

Use 1500 or 2000 to level cured touch-up paint, then 3000 before polishing.Wet.

View solution

What grit to sand clear coat runs?

Clear coat runs leave raised glossy lines that remain visible after curing.

Use 1000 to level carefully, then 1500, 2000, and 3000 before polishing.Wet.

View solution

What grit to smooth epoxy floor flakes?

Decorative floor flakes can leave sharp or raised spots before topcoat.

Use 120 or 180 lightly to knock down flakes, then clean before clear coat.Dry with dust control.

View solution