Answer
For saw burn marks, use 120 or 150, then blend with 180 and 220.
Why it happens
Burn marks sit on the wood surface but may require leveling if they are dark or glazed.
Recommended grit
Use 120 or 150 for burn marks, then 180 and 220 before finish.
Wet or dry
Dry.
Success check
The burn mark is removed and the area blends evenly.
What to do
- Sand the burn mark with 120 or 150.
- Blend the area into the surrounding wood.
- Refine with 180 and 220.
- Remove dust before finishing.
Avoid: Do not stain over dark saw burn marks.